mzigaib
2023年12月21日 13:17:13
I am trying to use the clone control panel but it is giving me an error:
MESSAGE SEND ERROR(clone1) ws://127.0.0.1:36871/clone Msg='""' Error='"Broken pipe"'
Any tips?
jason_iversen
2023年12月21日 18:18:51
Could you post your OS / license type / version numbers / etc?
Is Karma able to start up okay otherwise? I remember seeing issues with Apprentice limit-resolution and such.
jsmack
2023年12月21日 19:15:03
Could it be due to firewall interference?
mzigaib
2023年12月21日 19:49:50
jason_iversen
Could you post your OS / license type / version numbers / etc?
Is Karma able to start up okay otherwise? I remember seeing issues with Apprentice limit-resolution and such.
-Fedora 39
-Apprentice
-Build 547
I did try both Karma XPU and CPU.
And yes Karma is working normally in CPU and XPU on normal renders.
mzigaib
2023年12月21日 21:36:06
jsmack
Could it be due to firewall interference?
I turned it off, I will try to restart and try again.
mzigaib
2023年12月22日 00:09:01
No luck so far even with the firewall off.
mzigaib
2024年10月29日 22:40:18
Does anyone has any tips for this?
I am using:
-Fedora 40
-Aprendice 20.5 build 370
-Kernel 6.11
-Nvidia Driver 560.35
Sometimes it works but most of the times I got this error
"MESSAGE SEND ERROR(clone1) ws://127.0.0.1:36515/clone Msg='""' Error='"Operation canceled"'"
mtucker
2024年10月31日 13:57:45
I'm sorry, I have not seen this myself. And nobody else is chiming in here so I assume it's not a terribly common problem. That's going to make it tough to track down...
By the IP address I'm assuming this is a local clone you are creating? Have you got any unusual plugins running in Houdini, or is this basically a vanilla installation?
mzigaib
2024年11月1日 01:08:49
I am using Labs, qlib and MOPs nothing too unusual.
The thing is that it seems I need to point exactly the node I am rendering then it works but if I just point to the stage sometimes it works sometimes it does not but it is hard to pinpoint exactly what the problem is when the log jus says "Operatin Canceled".
I will keep my eyes to see if I got any more unusual behavior.
Thanks for the feedback.
bvold
2024年12月30日 13:10:54
Having the same exact issue. Did you ever get this resolved?
mzigaib
2024年12月30日 13:53:53
It got working on my newest installation of newer buildsbut I am not sure what was causing it, if it is a bug or something on my machine, unfortunately.
mzigaib
2025年10月2日 10:50:07
Does anyone knows what this error means on clone control in the log viewer?
The I/O operation has been aborted because of either a thread exit or an application request
Any tips?
I am on Windows 11 by the way.