After I used autorigbuilder, some of the handle is out of place. I know I can use the configure control to offset the handle but the issue is the pivot is still remains at that spot.
I tried to get in the graph and found that I can tweak by make change to the restlocal of the ObjectTransform that built by autorigbuilder. I also tried the skel::getpointlocaltransform but I have no clue to fill the proper name for it.
Please help with this issue. Or if there is another method to get more decent handle position please let me know.
Thank you!

Which handle do you want to move? Can you be a little more specific about your setup, It matters if you want to
move a simple control or a pole vector.

Can you maybe share a small setup and image?

i have added a small snippet to update the rest of select controls using positions set by a apex rigpose

william_harley
Which handle do you want to move? Can you be a little more specific about your setup, It matters if you want to
move a simple control or a pole vector.

Can you maybe share a small setup and image?

i have added a small snippet to update the rest of select controls using positions set by a apex rigpose

Hi william_harley, thanks for the reply. Here is image of the issue I have. This is after I put it the ConfigureControl just want to make the handle control with a little more decent positioning, after all that the pivot is still remains the same and the orientation is not right. My need is to move the pivot point the center of the handle control. I did found a temponary solution for it. It is to move the pivot point later when in animation stage.

The only way that you can move the pivot of the control is to update its restlocal.
What you are seeing in your screengrab is the control with a offset on the control shape. If you want to move the pivot of the control you will have to update the restlocal of the control.

Have you had a look at the file I shared?