Vignette Copernicus node

Darkens the corners of an input layer.

On this page

Parameters
Inputs
Outputs

This node adds vignetting to an input layer, which darkens the corners of the image. The node reduces the brightness towards the middle of the image to emphasize the center.

For example, use this node when you want to frame the center of an image or add artistic effects that mimic an old-fashioned camera lens.

Parameters ¶

Signature

The layer type that the source accepts.

See Signatures for more information.

Mask

The amount of the new value to mix in with the original value. Higher values mix in more of the new value. Lower values mix in less of the new value.

The default value is 1, which means this node uses only the new value. See Mask for more information.

Brightness

The scale factor to control how bright or dim the vignette is. Higher values increase the brightness. Lower values decrease the brightness.

Shape

The shape of the vignette.

Round

The darkened corners create a circular shape around the center.

Rectangle

The darkened corners create a rectangular shape around the center.

Blend

Blend between the Round and Rectangle outputs.

Circle Radius

When Shape is Round or Blend, this is the radius of the vignette. Higher values shrink the vignette outwards towards the corners, while lower values expand the vignette inwards towards the center.

Circle Scale

When Shape is Round or Blend, this is the non-uniform scale of the vignette. This value is useful when your layer’s aspect ratio isn’t 1:1.

Rectangle Size

When Shape is Rectangle or Blend, this is the size of the vignette.

Round Corners

When Shape is Rectangle or Blend, this is the amount to round the corners of the rectangle. A value of 0 results in a sharp-angled rectangle.

Blend

When Shape is Blend, this is the amount to blend between the Round and Rectangle shapes. A value of 0 outputs only the Round values, while a value of 1 outputs only the Rectangle values.

Center

The center of the vignette in image space.

Tip

Click and then click a location in the image to set the Center.

Blur

The amount to blur the vignette. Higher values expand the blur radius outwards to smooth the vignette. Lower values contract the blur radius to sharpen the vignette.

Shape Ramp

The shape of the vignette, where a Value of 1 represents the black areas. This parameter’s output is noticeable only if your vignette is somewhat smooth (blurry).

See Ramp parameters for more information.

Inputs ¶

source

The original layer to which to apply the vignetting.

mask

An optional per-pixel mask amount that’s scaled by the Mask parameter.

Outputs ¶

vignette

The layer with the vignetting applied.

shape

The vignette mask. For example, use this output to apply effects (such as Streak Blur) to the same region of the image.

Copernicus nodes

Auto Stereogram

Generates an image with a 3D illusion.
Bake Geometry Textures

Generates textures by baking between a low-resolution and high-resolution mesh at interactive speeds.
Bend

Curves images using handles or a captured region.
Blend

Blends two layers together.
Block Begin

Start of a block, containing its inputs.
Block End

End of a block, declaring its outputs.
Block to Geometry

Compiles a block and produces its geometry representation.
Blur

Applies a blur to a layer.
Bokeh

Creates a Bokeh effect by expanding each pixel by an aperture shape.
Bounding Rectangle

Finds the bounding rectangle of a mask.
Bright

Brightens a layer.
Bubble Noise

Generates bubble noise.
Cable Filter

Removes empty wires from a cable.
Cable Merge

Combines two cables into one cable.
Cable Pack

Combines input layers into a cable.
Cable Rename

Renames a cable’s wires based on filters.
Cable Sort

Sorts a cable’s wires by name.
Cable Split

Splits a cable based on filtering parameters.
Cable Switch

Selects an input cable.
Cable Unpack

Extracts individual wires from a cable.
Cache

Caches the input layers for faster playback.
Camera Import

Creates a layer in a camera’s space.
Camera Properties

Adjusts the camera properties of a layer.
Channel Extract

Extracts a channel from a layer.
Channel Join

Combines multiple Mono layers into one multichannel layer.
Channel Split

Divides a layer’s channels into Mono layers.
Channel Swap

Swaps channels within a multichannel layer.
Checkerboard

Creates an alternating checker pattern.
Chladni Cymatic Patterns

Generates interference patterns that represent various vibration modes.
Chroma Key

Keys an input based on hue, saturation, and luminance ranges.
Chromatic Aberration

Adds chromatic aberration to your image.
Clamp

Clamps an input layer.
Cloud Noise 3D

Generates a billowy cloud noise.
Color Correct

Adjusts colors in the image.
Combine Layers

Combines all input layers.
Combine Normals

Blends two normal maps together.
Compare

Creates a mask by comparing two layers.
Constant

Initializes pixels to constant values.
Contact Sheet

Arranges input layers into a contact sheet.
Contrast

Applies contrast to a layer.
Convert Depth

Converts depth layers between height, depth, and distance.
Convert Normal

Converts normal layers between signed and offset.
Convolve 3×3

Convolves a layer by a 3×3 kernel.
Copy and Transform

Copies stamps and applies transformations to the copies.
Corner Pin

Pins a layer’s corners in a reference layer.
Crop

Crops a layer to a new size.
Cross Product

Performs a cross product of two RGB layers.
Cryptomatte

Builds a matte from cryptomatte layers.
Cryptomatte Decode

Decodes a cyrptomatte into coverage and ID.
Cryptomatte Encode

Encodes a coverage and object hash into a cryptomatte layer.
Crystal Noise

Generates a sharp and angular Worley noise type.
Curvature

Computes the curvature of a layer.
Curve 3D

Lets you interactively draw Bézier curves using tools similar to 2D illustration programs, as well as polylines and NURBS.
Defocus

Defocuses an input layer.
Denoise AI

Denoises an input layer.
Denoise TVD

Removes white noise from an image.
Derivative

Computes the derivative of the source layer along the x- and y-axis.
Dilate Erode

Dilates or erodes a layer.
Distort

Distorts an input layer.
Dot Product

Performs dot product between two layers.
Edge Detect

Detects edges in the input image.
Edge Detect by Contour

Detects varying-width silhouette lines.
Edge Detect by Depth

Detects varying-width self-occluding silhouettes.
Edge Detect by Normal

Detects varying-width crease-lines.
Eikonal

Computes distances by solving the Eikonal equation.
Equalize

Equalizes colors by stretching or shifting their range.
Error

Generates a message, warning, or error.
Extrapolate Boundaries

Fills empty areas of an image using colors at the edges of non-empty areas.
Feather

Smooths out sharp changes in contrast.
Fetch

Brings a COP node’s outputs into the current network.
File

Loads an image or video from disk.
Fill

Fills a layer with a constant value.
Fill Connected

Flood fills the connected regions of a layer.
Flip

Flips a layer horizontally, vertically, or diagonally.
Flow Block Begin

Start of a Flow simulation block.
Flow Block End

End of a Flow simulation block.
Flow Project Non-Divergent Multigrid

Removes divergent components from a 2-dimensional vector field.
Font

Rasterizes text onto a layer from Type 1, TrueType, and OpenType fonts.
Fractal Noise

Generates fractal noise.
Fractal Noise 3D

Generates fractal noise from 3D locations.
Function

Applies a mathematical function to a layer.
Gamma

Applies gamma correction to a layer.
Geometry to Layer

Converts a volume into a layer.
Glow

Adds glow to an image based on its luminance.
HSV Adjust

Converts between RGB and HSV color spaces, or modifies HSV.
Heat Distort

Distorts the input layer to simulate heat around fire and other mirage effects.
Heat Distort by Layer

Distorts the input layer using another layer to simulate heat around fire and other mirage effects.
Height to Ambient Occlusion

Imagines a sphere for each pixel and determines how occluded that sphere is based on its surroundings.
Height to Normal

Converts a height layer to a normal layer.
Height to Shadow

Creates shadows using a virtual light source.
HeightField Visualize

Visualizes layers as colored heightfields.
Hex Tile

Randomly tiles texture.
Histogram

Builds a histogram from a layer.
Hyperbolic Tile

Generates hyperbolic polygon tiles for texture patterns.
ID to Mask

Creates a mask from an ID layer based on filtering parameters.
ID to Mono

Converts an ID layer into a mono layer.
ID to RGB

Converts an ID layer into an RGB layer.
ID to SDF

Computes a Signed Distance Field from changes in ID values.
Illegal Pixel

Detects and then fixes or highlights illegal pixels in images.
Input

Fetches the input to a subnetwork.
Integrate Volume

Simple integration of a VDB along camera rays.
Invert

Inverts a layer.
Invoke Block

Runs a block using inputs plugged into this node.
Invoke Geometry

Runs a program saved into geometry using inputs plugged into this node.
Julia Fractal

Computes the Julia set to create a fractal.
Kuwahara Filter

Applies the Kuwahara filter, which creates painterly effects.
Lattice Deform

Applies grid-based deformation to a layer.
Layer

Generates a layer.
Layer Attribute Create

Adds or edits user-defined metadata on a layer.
Layer Attribute Delete

Removes user-defined metadata from a layer.
Layer Properties

Edits basic layer metadata.
Layer from Curves

Render Curves into a Layer.
Layer from VDB

Sets a layer’s values from a VDB.
Layer to Geometry

Converts a layer into a 2D volume.
Layer to Points

Creates points based on a layer.
Layer to VDB Leaf Points

Creates a point for each leaf of a VDB that would be in an envelope.
Lens Distort

Adds radial and tangential distortion to a layer based on OpenCV coefficients.
Light

Lights a layer given a light direction and normals.
Live Video

Captures images from a live video source.
Mask from Curves

Creates a mask from 2D curves.
Match Camera

Transforms a layer to match a reference camera.
Match UDIM

Reframes pixels of a layer to match a particular UDIM tile.
Median

Applies a median filter to an image.
Mirror

Mirrors an image based on an arbitrary number of planes.
Mono

Converts a layer to mono.
Mono to ID

Converts a mono layer into an ID layer.
Mono to RGB

Converts a mono layer into an RGB layer.
Mono to RGBA

Converts a mono layer into an RGBA layer.
Mono to SDF

Computes a signed distance field from an iso-level of a mono layer.
Null

Passes inputs to the outputs.
OCIO Transform

Converts color spaces using OCIO transforms.
ONNX Inference

Applies inference from an ONNX Machine Learning model.
OpenCL

Executes an OpenCL kernel on layers, attributes, volumes, and VDBs.
Output

Collects the outputs of a subnetwork.
Phasor Noise

Generates phasor noise, which resembles a wave pattern.
Pixelate

Increases the size of pixels to pixelate an input layer.
Polar to UV

Converts polar coordinate pixels to Cartesian pixels.
Position Map

Generates a position map.
Position Sample

Samples an input texture by position.
Prefix Sum

Computes the prefix sum of a layer.
Premultiply

Premultiplies or un-premultiplies an RGBA layer.
Preview Material

Applies the preview material to geometry.
Project on Layer

Projects a layer onto a target layer.
Pyro Activate

Changes the activation of VDBs in a Pyro simulation.
Pyro Advect

Advects VDBs by Velocity.
Pyro Advect by Map

Advects a VDB by a flow map.
Pyro Axis Force

Applies a force around an axis to a velocity VDB.
Pyro Block Begin

Start of a Pyro simulation block.
Pyro Block End

End of a Pyro simulation block.
Pyro Build Advection Map

Constructs a flow map from a velocity VDB.
Pyro Buoyancy

Applies a Buoyancy force.
Pyro Configure

Configures a Pyro simulation.
Pyro Dissipate

Dissipates a VDB’s values over time.
Pyro Disturbance

Applies disturbance to a velocity VDB to break up still air.
Pyro Light Ambient

Builds a light field of ambient illumination of a VDB.
Pyro Light Scatter

Builds a light field of internal glow of a VDB.
Pyro Light from Points

Builds a light field of points lighting a VDB.
Pyro Packed MipMap

Builds an in-place MipMap of a VDB.
Pyro Project Non-Divergent Electro Static

Removes divergence from a velocity VDB.
Pyro Source from Layer

Sources from a layer’s envelope into a VDB.
Pyro Source from Points

Sources points into a VDB.
Pyro Turbulence

Apply turbulence to a velocity VDB.
Pyro Uniform Force

Applies a uniform force.
Python Snippet

Runs a snippet of Python on layers.
Quantize

Quantizes input data into discrete steps.
RGB to RGBA

Converts RGB layers to RGBA.
RGB to UV

Splits an RGB layer into UV and mono layers.
RGBA to RGB

Converts RGBA layers to RGB.
RGBA to UV

Splits an RGBA layer into two UV layers.
ROP Image

Writes the output of a COP network to disk.
Ramp

Generates linear and radial ramps.
Random Mono

Creates a mono layer with random values.
Random RGB

Creates an RGB layer with random colors.
Rasterize Curves

Rasterizes curves onto a layer.
Rasterize Geometry

Rasterizes geometry onto a layer.
Rasterize Layer

Rasterizes a layer onto another layer’s camera.
Rasterize Setup

Prepares geometry for the Rasterize Geometry COP.
Rasterize Volume

Renders a volume viewed through a camera
Ray Trace

Performs ray tracing on an input mesh based on an origins and directions map.
Reaction-Diffusion Block Begin

Start of a Reaction-Diffusion simulation block.
Reaction-Diffusion Block End

Creates unique patterns by solving the reaction and diffusion of multiple chemicals as described by its inputs and parameters.
Remap

Remaps a layer.
Resample

Performs image scaling by changing the width, height, and pixel sizes.
SDF Adjust

Modifies the values for a Mono SDF layer.
SDF Blend

Combines two Mono SDF layers.
SDF Shape

Builds a 2D signed distance field of a selected shape.
SDF to Mono

Converts an SDF field to a Mono image layer.
SDF to RGB

Converts an SDF field to an RGB color layer.
SOP Import

Imports SOP geometry into Copernicus.
SOP Invoke

Invokes a compiled SOP block on the inputs.
SOP Invoke Graph

Invokes a geometry SOP graph on the inputs.
Scatter Shapes

Scatters input stamps across the image using randomization controls.
Scatter on Curves

Scatters input stamps along an input curve using randomization controls.
Segment by Connectivity

Segment a layer into connected components.
Segment by Value

Segment a mono layer into bands of similar value.
Sequence Blend

Blends multiple image inputs by a blend factor.
Sharpen

Sharpens an input layer to increase the definition of its edges.
Slap Comp Import

Import live layers from the Solaris Viewport.
Slope Direction

Converts a height layer into a direction layer.
Smooth Fill

Smoothly fills a region of a layer.
Solve Poisson Multigrid

Solves Poisson’s equation in a rectangular region using geometric multigrid.
Space Transform

Transforms positions and UV values between spaces.
Stamp Points

Stamps layers from point positions.
Stash

Stashes the input of the node on command and uses it as the node’s output.
Statistics

Outputs the average, minimum and maximum values of the input layer
Statistics by ID

Compute statistics for each ID island.
Streak Blur

Streaks an image, adding a motion blur effect.
Subnetwork

Used to organize a collection of COPs into one node.
Surface Dither

Applies a halftone dithering pattern relative to UVs.
Swirl

Twists an image layer into a spiral shape.
Switch

Selects an input layer.
Switch If Wired

Selects an input based on what is connected.
Switch by Type

Selects an output layer by the type of the inputs.
Tile Pattern

Generates rectangular tiles for texture patterns.
Tone Map

Applies a filmic tone mapping curve to compress a high dynamic range input into a displayable range.
Transform 2D

Transforms a layer in 2D.
Transform 3D

Transforms a layer in 3D.
Triplanar

Generates a texture by projecting X, Y, and Z textures onto the position layer.
Triplanar Hex Tile

Seamless texturing and normal mapping of triplanar projections without visible repetitions.
Triplanar UV

Generates UVs in three orthogonal projections.
Two Way Switch If Wired

Selects between two inputs based on if you wire in another input.
UV Map

Generates a UV Map.
UV Map by ID

Creates a UV Map for each connected ID island.
UV Sample

Samples an input layer using a UV layer.
UV Transform

Transforms the values of a UV layer in 2d space.
UV to Polar

Converts Cartesian coordinate pixels to polar coordinate pixels.
UV to RGB

Joins a UV and mono layer into an RGB layer.
UV to RGBA

Joins two UV layers into an RGBA layer.
VDB Activate from Points

Activates leaves on a VDB according to a point cloud.
VDB Leaf Points

Creates a point for each active leaf in a VDB.
VDB Position Map

Stores in each voxel that voxel’s position.
VDB Reshape

Rebuilds a VDB to match another VDB’s topology.
VDB Visualize

Creates multi-volume visualization.
VDB Visualize Slice

Extracts a slice from a VDB as Geometry for visualization.
VDB Visualize Tree

Builds a geometry visualizing the topology of a VDB.
VDB Visualize Velocity

Traces streamers through a velocity VDB.
VDB from Layer

Sets VDB values from the closest values in a layer.
Vector Transform

Transforms values of an RGB layer in 3d space.
Vector Transform 2D

Transforms the values of a UV layer in 2D space.
Vignette

Darkens the corners of an input layer.
Wipe

Performs a wipe transition between two images.
Worley Noise

Generates Worley noise.
Worley Noise 3D

Generates Worley noise from 3D locations.
Wrangle

Runs a VEX snippet to modify layer values.
Z Composite

Composites two layers by depth.