| Since | 20.0 |
This node is used to provide inputs for an APEX graph. After making connections to this node, 
click on the subports to rename them as desired.
| See also |
APEX nodes
-
Computes the absolute value.
-
Computes the inverse cosine.
-
Calculates the sum of the input values.
-
Checks if two values are almost equal.
-
Performs a logical AND operation.
-
Computes the inverse sine.
-
Computes the inverse tangent.
-
Computes the inverse tangent of y/x.
-
Computes the average of the input values.
-
Performs a bitwise AND operation.
-
Performs a bitwise inversion of each bit of an integer.
-
Performs a bitwise OR operation.
-
Performs a bitwise XOR operation.
-
Constructs a bit mask from the entries of the input ports.
-
Converts a 3D cartesian coordinate to its geodetic coordinate.
-
Converts a 2D cartesian coordinate to its polar coordinate.
-
Converts a 3D cartesian coordinate to its spherical coordinate.
-
Returns the smallest integer greater than or equal to a floating point number.
-
Clamps a value between min and max.
-
Computes the complement of the input value by subtracting it from 1.
-
Constructs a component bitmask.
-
Checks which components are active in a component bitmask.
-
Converts an input of type SrcT to an output of type DesT.
-
Copies the input argument.
-
Computes the cosine of an angle.
-
Computes the cross product of two vectors.
-
Converts an angle in degrees to radians.
-
Returns the Euclidean distance between two vectors.
-
Calculates the quotient of the input values.
-
Computes the dot product of two vectors.
-
Intersects a ray with a plane.
-
Takes a value in one range and shifts it to a new range.
-
Returns True if two values are equal.
-
Raises a value to an exponent.
-
Takes a (clamped) value in one range and shifts it to a new range.
-
Takes a value in the range (0, 1) and shifts it to a new range.
-
Takes a value in the range (1, 0) and shifts it to a new range.
-
Takes a value in the range (-1, 1) and shifts it to a new range.
-
Builds a Vector2 from Floats.
-
Builds a Vector3 from Floats.
-
Builds a Vector4 from Floats.
-
Returns the largest integer less than or equal to a floating point number.
-
Defines the start of a for loop.
-
Defines the start of a for-each loop.
-
Defines the end of a for-each loop.
-
Defines the end of a for loop.
-
Returns the fractional component of a floating point number.
-
Converts a geodetic coordinate to its 3D cartesian coordinate.
-
Extracts a single component of a vector or matrix type.
-
Determines if a value is greater than another value.
-
Determines if a value is greater than or equal to another value.
-
Defines the start of an If block for conditional execution.
-
Defines the end of an If block for conditional execution.
-
Provides inputs for a graph.
-
Extracts individual bits from a bit mask.
-
Inverts a matrix.
-
Computes the length of a vector.
-
Performs linear interpolation between the input values.
-
Determines if a value is less than another value.
-
Determines if a value is less than or equal to another value.
-
Adds an APEX log entry to the log viewer.
-
Extracts the row vectors from a Matrix3.
-
Extracts the row vectors from a Matrix4.
-
Calculates the maximum of the input values.
-
Calculates the minimum of the input values.
-
Applies the modulo operation to the two input values.
-
Calculates the product of the input values.
-
Performs linear interpolation between two vectors and normalizes the result.
-
Negates the input value.
-
Produces Perlin-style non-periodic noise.
-
Normalizes a vector.
-
Inverts the logical value.
-
Utility node for passing through unmodified values.
-
Utility node for passing through unmodified values of a given type.
-
Performs a logical OR operation.
-
Provides outputs for a graph.
-
Converts a polar coordinate to its cartesian coordinate.
-
Rounds down a value to a multiple of another value.
-
Converts an angle in radians to degrees.
-
Looks up the value of a ramp at a specified position.
-
Rounds a floating point value to the nearest integer or to a specific number of decimal places.
-
Executes a VEX snippet.
-
Sets a single component of a vector or matrix type.
-
Computes the sine of an angle.
-
Converts a spherical coordinate to its 3D cartesian coordinate.
-
Provides a container of subgraphs.
-
Calculates the difference between the input values.
-
Switches between different input values based on an index.
-
Switches between different input values based on the name of the input port.
-
Computes the tangent of an angle.
-
Represents and builds a hierarchy of transformations in a rig.
-
Transposes a matrix.
-
Switches between two inputs based on a Bool value.
-
Holds a copy of an input value.
-
Extracts all the components of a Vector2.
-
Extracts all the components of a Vector3.
-
Constructs a Matrix3 from the input row vectors.
-
Extracts all the components of a Vector4.
-
Constructs a Matrix4 from the input row vectors.
-
Performs a logical XOR operation.
-
Adds two arrays element-wise.
-
Appends a value to an array.
-
Builds an array with the provided values.
-
Clears an array.
-
Divides two arrays element-wise.
-
Extends an array with another array.
-
Finds the index of an array element with a specific value.
-
Gets an element in an array.
-
Inserts an element at a specific array index.
-
Returns the length of an array.
-
Performs linear interpolation between two arrays element-wise.
-
Finds the maximum element in an array.
-
Finds the minimum element in an array.
-
Multiplies two arrays element-wise.
-
Removes an element from an array.
-
Reverses the order of elements in an array.
-
Scales all elements of an array by a scalar.
-
Sets an element in an array.
-
Sorts an array in ascending order.
-
array::SortAndRemoveDuplicates
Sorts an array in ascending order and removes duplicate elements.
-
Subtracts two arrays element-wise.
-
Finds the sum of the array elements.
-
Adds a key to a channel.
-
Adds keys to channels in a collection.
-
Adds keys to channels in an animation stack.
-
Creates an animation stack from the layers of an APEX scene’s animation.
-
Evaluates parameters from an animation stack.
-
Blend keys from 2 channels using a blend value or a blend channel.
-
ch::ChannelCollectionFromPrims
Creates a channel collection from the channel primitives on a geometry.
-
Creates an APEX channel from a channel collection.
-
Creates an APEX channel from a channel primitive.
-
Adds a channel to a geometry as a curve or collection of points.
-
Adds a channel primitive to a geometry.
-
Creates APEX channels from a channel collection.
-
Creates APEX channels from the channel primitives on a geometry.
-
-
-
Adds additional cycles of the channels in a collection.
-
Deletes keyframes from a channel collection.
-
Applies an Euler filter on the rotation channels in a channel collection.
-
Reduces the keys of the channels in a collection while maintaining their shape.
-
Scales the key values of a collection of channels about a pivot.
-
Adds an APEX channel to a channel collection.
-
Adds APEX channels to a channel collection.
-
Shifts all the keys of a collection of channels by a constant time.
-
ch::CollectionSmoothAutoTangents
Computes the tangents on the keys of each channel in a collection that has auto tangents enabled.
-
-
Adds additional cycles of a channel.
-
Deletes keyframes from an APEX channel.
-
Evaluates a collection of channels and updates a dictionary with the results.
-
Applies an Euler filter on rotation channels.
-
Evaluates a channel.
-
Creates a channel from the sum of a set of channels.
-
Evaluates a set of channels.
-
ch::PrimsFromChannelCollection
Adds channels from a channel collection to a geometry.
-
Reduces the keys of a channel while maintaining its shape.
-
Scales the key values of a channel about a pivot.
-
Shifts all the keys of a channel by a constant time.
-
Computes the tangents on the keys of a channel that has auto tangents enabled.
-
Adds an abstract control to a graph.
-
-
-
-
-
-
Finds the segments in a component to loop over.
-
Gets the rest transform of a TransformObject node.
-
component::GetTransformChildren
Gets the children of a TransformObject node.
-
component::GetTransformDescendants
Gets the descendants of a TransformObject node.
-
Gets the parent of a TransformObject node.
-
component::InsertTransformParent
Inserts a new TransformObject node between a node and its parent.
-
-
-
-
Inserts the component segment name into a string.
-
-
-
Sets the rest transform of a TransformObject node.
-
component::SetRestTransformFromSkel
Sets the rest transform of a TransformObject node based on a skeleton.
-
Sets the parent of a TransformObject node.
-
-
-
-
-
Updates the control shape of a TransformObject node.
-
Updates the parameter limits of a TransformObject or AbstractControl node.
-
controlgadget::SnapXFormToAxes
Snaps a transform to the specified axes during a mouse drag.
-
Copies a dictionary and adds new entries.
-
Searches the input dictionary for a key.
-
Creates a dictionary with the data IDs of the entries of an input dictionary.
-
Extracts multiple values from a dictionary.
-
Gets a value from a dictionary.
-
Gets a value from a dictionary of dictionaries.
-
Adds new entries to a dictionary.
-
Gets an array of the keys of a dictionary.
-
Performs pattern replacement on the keys of a dictionary.
-
Removes from a dictionary all entries with keys matching a pattern.
-
Renames the keys of a dictionary.
-
Sets a value into a dictionary.
-
Sets a value into a nested dictionary.
-
Copies entries from one dictionary to another, using a third dictionary to define the key mapping.
-
Updates the entries of a dictionary with the entries of other dictionaries.
-
Adds one dynamic path to another.
-
Adds a target for the dynamic path tweak solver.
-
Bakes a dynamic path.
-
Deforms a dynamic path as a mesh represented with Laplacian coordinates.
-
Evaluates a dynamic path at the given time.
-
dynamicpath::EvaluateInSourceTime
Evaluates a dynamic path at the given source time.
-
Evaluates a dynamic path at multiple times.
-
dynamicpath::EvaluateMultiInSourceTime
Evaluates a dynamic path at multiple source times.
-
Gets sections of a dynamic path and their corresponding layer indices.
-
Gets the times at which to key a character to follow the motion of a dynamic path.
-
Gets a section of a dynamic path and its corresponding layer index.
-
Gets the start time, end time, and life of a dynamic path.
-
dynamicpath::LoadFromAnimStack
Creates a dynamic path that represents the motion of a TransformObject by sampling the translate, rotate, and scale parameters from an animation stack.
-
Creates a dynamic path from arrays of positions, times, and source times.
-
Creates a dynamic path by sampling a set of X, Y, and Z channels.
-
Loads a dynamic path from the geometric representation of a dynamic path.
-
Constructs dynamic paths by evaluating Matrix4 outputs of a graph over time.
-
dynamicpath::LoadFromGraphChannels
Constructs dynamic paths by building a parameter dictionary for a graph from a channel collection, and evaluating Matrix4 outputs of the graph over time.
-
dynamicpath::ProjectileLifeFromPlane
Computes the life of a projectile arc based on the start position, end position, and maximum height of the projectile in a given direction.
-
dynamicpath::ProjectilePathEvaluatePeak
Determines the peak of a projectile path.
-
dynamicpath::ProjectilePathFromLife
Creates a dynamic path representing the arc of a projectile that is launched between two positions in a specific amount of time.
-
dynamicpath::ProjectilePathFromPlane
Creates a dynamic path representing the arc of a projectile that is launched between two positions while skimming a height plane.
-
dynamicpath::ProjectilePathFromSpeed
Creates a dynamic path representing the arc of a projectile that is launched between two positions with a specific initial speed.
-
dynamicpath::ResolveTweakTargets
Solves for a dynamic path using the Tweak algorithm.
-
Creates a geometry from a dynamic path.
-
Subtracts one dynamic path from another.
-
Gets the transform of a bone in a full body IK skeleton.
-
Computes the center of mass of a full body IK skeleton.
-
Sets a center of mass target on a full body IK solver.
-
Sets a skeleton on a full body IK solver.
-
Sets a target on a full body IK solver.
-
Sets multiple targets on a full body IK solver.
-
Sets targets on a full body IK solver from a dictionary.
-
Sets targets on a full body IK solver from a geometry.
-
Gets a full body IK skeleton stored in geometry.
-
Updates geometry using information from a full body IK skeleton.
-
Solves a full body IK skeleton using the FABRIK algorithm.
-
Solves a full body IK skeleton using the PhysIK algorithm.
-
Creates a full body IK solver from a full body IK skeleton.
-
Creates a full body IK skeleton target.
-
Creates a packed primitive that contains the given geometry.
-
Returns the values of an array attribute.
-
Performs ray intersection with a geometry and computes weights for nearby points, outputting the weights as geometry attributes.
-
Returns the bounding box of a geometry.
-
Copy a detail attribute between two geometries.
-
Returns the value of a detail attribute.
-
Returns the geometry embedded in a packed primitive.
-
Finds all points in a geometry with a given attribute value.
-
Finds all primitives in a geometry with a given attribute value.
-
Finds all vertices in a geometry with a given attribute value.
-
Defines the start of a for-each loop that iterates over the points in a geometry.
-
Defines the end of a for-each loop that iterates over the points in a geometry.
-
Defines the start of a for-each loop that iterates over the primitives in a geometry.
-
Defines the end of a for-each loop that iterates over the primitives in a geometry.
-
Returns a geometry from a geometry file read from disk.
-
Returns an array of points based on a pattern.
-
Returns an array of primitives based on a pattern.
-
Computes an intersection cache for a geometry.
-
Determines the intersection point of a ray with an intersection cache.
-
Performs ray intersection with a geometry and computes weights for nearby points, outputting the weights in an array.
-
Deforms geometry based on the reshaping of a control lattice.
-
Merges the points and primitives from other geometry objects into this geometry.
-
Packs each input and merges them together into a single geometry.
-
Returns the number of points in a geometry.
-
Returns the number of primitives in a geometry.
-
Returns the value of a point attribute.
-
Returns the values of an attribute on the points that match a second attribute name.
-
Returns all the primitives that contain a given point.
-
Returns the value of a primitive attribute.
-
Returns the values of an attribute on the primitives that match a second attribute name.
-
Returns all the points on a given primitive.
-
Replaces the contents of a geometry object with another geometry object.
-
Overrides the transforms of an agent primitive.
-
Sets a detail attribute value on a geometry.
-
Sets a point attribute value on a geometry.
-
Sets the value of a given attribute on all the points in a geometry.
-
geo::SetPointAttribValuesByName
Sets the value of an attribute on the points that match a second attribute name.
-
Sets a primitive attribute value on a geometry.
-
Sets the value of a given attribute on all the primitives in a geometry.
-
geo::SetPrimAttribValuesByName
Sets the value of an attribute on the primitives that match a second attribute name.
-
Sets a vertex attribute value on a geometry.
-
Sets the value of a given attribute on all the vertices in a geometry.
-
geo::SetVertexAttribValuesByName
Sets the value of an attribute on the vertices that match a second attribute name.
-
Transforms a geometry using a transformation matrix.
-
Embeds a geometry into a packed primitive, replacing the primitive’s contents.
-
Returns the value of a vertex attribute.
-
Returns the values of an attribute on the vertices that match a second attribute name.
-
geoutils::CopyToPointsTargetAttribs
Sets up default target attributes for use in sop::copytopoints.
-
Creates a dotted line geometry.
-
Translates a geometry.
-
Scales a geometry by a scale factor along the x, y, and z axes.
-
Runs a VEX snippet on the incoming geometry.
-
Adds a node to an APEX graph.
-
Adds a node to a subnet in an APEX graph.
-
Adds or updates a node.
-
Adds a subnet node to an APEX graph, and sets the contents of the subnet.
-
Compiles a graph and reports any execution errors.
-
Connects two APEX node ports given the port IDs.
-
Gets the default parameters of an APEX graph.
-
Deletes a node from an APEX graph.
-
Deletes a set of nodes from an APEX graph.
-
Disconnects the wires connected to the specified port.
-
Duplicates the input node.
-
Evaluates outputs from an APEX graph.
-
Connects two APEX node ports given the node IDs and port names.
-
Removes the wire connecting the specified source and destination ports.
-
Returns the first matched node in an APEX graph based on a pattern.
-
Returns the first matched port in an APEX graph based on a pattern.
-
Finds a node in an APEX graph based on a node path.
-
Finds an input port on an APEX node.
-
Finds an output port on an APEX node.
-
Finds the tags of a node based on a pattern.
-
Finds an array of node IDs in an APEX graph based on a pattern.
-
Finds or adds a node to an APEX graph.
-
Finds or adds a port or subport on an APEX node based on a port name.
-
Finds a port on an APEX node based on a port name.
-
Finds the ports in an APEX graph based on a pattern.
-
Finds all APEX nodes that have a direct wire connection to a given port.
-
Finds the port that is connected to a given port.
-
Finds all ports that have a direct wire connection to a given port.
-
Finds the promoted graph input or output port that is connected to a given port.
-
Finds or adds a subport to a variadic port.
-
Gets the contents of an APEX subnet node.
-
Finds all the top-level parameter input ports of an APEX graph.
-
Finds all the top-level output ports of an APEX graph.
-
Checks if a tag exists on a node.
-
Checks if multiple tags exist on a node.
-
Determines whether an input port to a subgraph or subnet is connected, and returns either that port’s value or a fallback value.
-
Invokes an APEX graph.
-
Determines whether an input port to a subgraph or subnet is connected.
-
Creates a default positional layout of a selection of APEX nodes.
-
Loads an APEX graph from geometry.
-
Merges the contents of an APEX graph into an existing graph.
-
Gets the data for a node in an APEX graph.
-
Finds all the input ports on an APEX node.
-
Finds all the output ports on an APEX node.
-
Packs an array of APEX nodes into a subnet.
-
Parents two nodes in a graph.
-
Gets the data for a port in an APEX graph.
-
Gets the node that contains a given port in an APEX graph.
-
Connects a port to an APEX graph input.
-
Promotes an input port to the graph’s parms node.
-
Promotes multiple input ports to the graph’s parms node.
-
Promotes an output port to the graph’s output node.
-
Promotes multiple output ports to the graph’s output node.
-
Connects a port to an APEX graph output.
-
Promotes a port to the graph’s parms or output node.
-
Gets the properties of an APEX graph.
-
Sets the name of an input port, output port, or subport.
-
Finds and replaces a tag on a node.
-
Rewires the output ports on a node in an APEX graph.
-
Writes an APEX graph to geometry.
-
Updates the default parameter dictionary of an APEX graph.
-
Updates the properties dictionary of an APEX graph.
-
Sets the contents of a subnet in an APEX graph.
-
Sorts an APEX graph.
-
Compiles its internal subnetwork and outputs it as an APEX graph handle object.
-
Unpacks a subnet in an APEX graph.
-
-
Updates a node in an APEX graph.
-
Updates the parameters on a node in an APEX graph.
-
Updates the properties of a node in an APEX graph.
-
Updates the tags on a node in an APEX graph.
-
Returns whether a port can have subports.
-
Returns all the subnets that contain a given node.
-
Returns the callback name of a node.
-
Returns the name of a node.
-
Returns the parent subnet of a node.
-
Returns the parameters on a node.
-
Gets the path for a node ID in an APEX graph.
-
Returns the properties of a node.
-
Returns the tags on a node.
-
Returns the outer port of a subport.
-
Gets the path for a port ID in an APEX graph.
-
Adds a skel::SetPointTransforms node to the graph.
-
Adds or updates the TransformObject nodes for the joints in a guide skeleton.
-
Finds or adds guide geometry.
-
Finds the primary axis of a joint.
-
Parents joints and updates the matching nodes in the graph.
-
Sets the properties metadata on the guide joints.
-
guide::UpdatePatternFromGuides
Creates string patterns from skeleton joint names or a string array.
-
Sets shape data on TransformObjects.
-
Finds the distance between two quaternions.
-
Creates a unit quaternion from an angle and an axis.
-
Creates a unit quaternion from a set of Euler angles.
-
Converts a rotation matrix into a unit quaternion.
-
Inverts a quaternion.
-
Multiplies two quaternions.
-
Rotates a vector by a quaternion.
-
quaternion::SwingTwistDecompose
Decomposes a quaternion into a swing and a twist along an axis.
-
quaternion::SwingTwistInterpolate
Interpolates between two quaternions while interpolating the swing and twist components separately.
-
Converts a quaternion to an axis vector and an angle.
-
Creates a set of Euler angles from a quaternion.
-
Converts a quaternion to a rotation or transformation matrix.
-
Applies a ragdoll simulation to one or more characters.
-
Defines an abstract control in a rig.
-
Dynamically adds a deforming shape to a control shape library.
-
Constructs a local matrix by combining a local rest matrix with a set of transformation parameters.
-
Adds the option of modifying the shape of a control in an APEX rig.
-
Builds a spline from a list of CVs.
-
Builds a spline from an array of CVs.
-
Outputs a transform matrix derived from a location on a curve primitive.
-
Extracts a local transform given a child and parent transform, taking scale inheritance rules into account.
-
Extracts the transformation parameters from a local matrix with respect to a local rest matrix.
-
Represents a transformation in a transformation hierarchy.
-
Positions and orients joints from a root position, goal, and twist position using inverse kinematics.
-
Positions and orients joints from a root position, goal, and twist position using inverse kinematics, with inputs and outputs given as arrays.
-
Creates a parent constraint between two matrix transforms.
-
Computes a transform from a weighted mix of points on a geometry.
-
Performs pose-weight interpolation.
-
Computes a transform for a coordinate within a geometry primitive.
-
Performs radial basis function (RBF) interpolation.
-
Samples transforms from a spline.
-
rig::SampleSplineTransformsToArray
Samples transforms from a spline and outputs the samples in an array.
-
rig::SplineInterpolateTransforms
Generates and samples a spline.
-
rig::SplineInterpolateTransformsToArray
Generates and samples a spline, and outputs the samples in an array.
-
Converts a spline offset between its various representations.
-
Converts multiple spline offsets between their various representations.
-
Converts multiple spline offsets between their various representations.
-
Solves a two-joint IK chain.
-
Constrains a transform onto the surface of a geometry at the given UV texture coordinate.
-
Adds a new dynamics object to a simulation.
-
Adds a new dynamics relationship to a simulation.
-
Attaches data to a simulation object or relationship.
-
Returns the geometry from a simulation at a specified time.
-
Finds the unique ID of a simulation object by name.
-
Finds the unique ID of a simulation relationship by name.
-
Returns the geometry from a simulation object or a relationship’s subdata.
-
Loads a simulation state from a file.
-
Removes an object from a simulation.
-
Removes a relationship from a simulation.
-
Modifies the geometry subdata for a simulation object or relationship.
-
Creates a new dynamics simulation.
-
Creates a new KineFX point on a geometry.
-
Deletes a KineFX point from a geometry.
-
Deletes a group of KineFX points from a geometry.
-
Evaluates a single pose from multiple MotionClips.
-
Finds the first point number in a geometry that matches a pattern.
-
Finds a KineFX point by its name attribute.
-
Finds an array of point indices in a geometry that matches a pattern.
-
Finds all the KineFX points that do not have a parent.
-
Finds all the ancestors of a KineFX point.
-
Finds all the children of a KineFX point.
-
Finds all the descendants of a KineFX point.
-
Finds the parent of a KineFX point.
-
Returns the local transform attribute value of a KineFX point.
-
Returns the local transforms of multiple KineFX points.
-
Returns the world transform of a KineFX point.
-
Returns the world transforms of multiple KineFX points.
-
Sets a new parent for a KineFX point.
-
Sets new parents for multiple KineFX points.
-
Sets the world transforms of multiple KineFX points.
-
skel::SetPointTransformsFromAgent
Sets the world transforms of multiple KineFX points from an agent.
-
Sorts the KineFX points in a geometry based on its hierarchy.
-
Traverses the whole KineFX hierarchy and writes out the result.
-
Updates the attribute values of a KineFX point.
-
Converts a string to CamelCase style.
-
Determines if a string ends with a specific string.
-
Finds the first occurrence of a substring.
-
Ensures the string contains only valid characters.
-
Creates a formatted string from input values.
-
Converts an integer to string.
-
Converts a ramp to a string.
-
Returns a string that is the concatenation of the strings in an array.
-
Computes the length of a string.
-
Converts a string to all lowercase.
-
Splits a string at the first or last instance of a partition substring.
-
Splits a path into a folder and a file name.
-
Performs pattern replacement in a string.
-
Finds the first instance of a regular expression in a string.
-
Finds all instances of a regular expression in a string.
-
Matches an input string against a regular expression.
-
Replaces instances of a regular expression with a replacement string.
-
Splits a string based on a regular expression.
-
Performs substring replacement in a string.
-
Reverses a string.
-
Splits a string into multiple tokens.
-
Determines if a string starts with a specific string.
-
Extracts a substring from a string.
-
Converts a string to a float.
-
Converts a string to an integer.
-
Converts a string to a ramp.
-
Converts a string to all uppercase.
-
Blends between two matrices.
-
Builds a transformation matrix from transform components.
-
transform::ClampedLookAtPorthole
Limits the rotational range of a LookAt to a porthole on a sphere’s surface.
-
transform::ClampedLookAtWindow
Limits the rotational range of a LookAt to a window on a sphere’s surface.
-
Computes the determinant of a matrix.
-
Computes a transformation representing the rotation between two vectors.
-
Decomposes a matrix into its individual transformation components.
-
Rotates a matrix’s local look at axis toward a target.
-
Mirror transformation matrix around specified plane.
-
Blends multiple matrices or quaternions using a set of weights.
-
transform::MultiBlendFromArray
Blends an array of matrices or quaternions using an array of weights.
-
Decomposes a matrix into rotation and stretch matrices using polar decomposition.
-
Applies a prerotation to a matrix.
-
Applies a prescale to a matrix.
-
Applies a pretranslation to a matrix.
-
Projects a point onto a sphere.
-
transform::ProjectOnSphericalPorthole
Projects a point onto a circular porthole on the surface of a sphere.
-
transform::ProjectOnSphericalWindow
Projects a point onto a rectangular window located on the surface of a sphere.
-
Applies a rotation to a matrix.
-
Prerotates a matrix using an angle-axis rotation.
-
Applies scaling to a matrix transformation.
-
Performs spherical linear interpolation.
-
Finds the closest Euler angles to a reference rotation.
-
Translates a matrix by a vector.
-
Fetches information about the viewport transform from the uievent.
-
Fetches information about the pressed mouse button from the uievent.
-
Fetches information about the positioning of the control at the start of a drag from the uievent.
-
Fetches information about the state of the mouse from the uievent.
-
Fetches information about the NDC transform and mouse position in NDC space.
-
Fetches information about the reference transforms on the primary control.
-
Fetches information about the mouse ray from the uievent.
-
Fetches information about the transform handle interaction.